Korean
Japanese
Italian
Spanish
Paint Sapper Storage Rack Ideas
The picture is so shit
Well
I wish there were two lines like that in one box. Put only the paint container
And this is my standard
I have two types of paint containers
One is about 5.5cm in diameter and one is about 4cm now
Make the space 6cm in diameter and 4.5cm in diameter separately
And things like those gaps let consumers buy as an option
Those storage borders were conceived by the Arttystation family
Just like a fence
Do not separate each paint container
Then it becomes'plug in' rather than'put in'
It's troublesome to plug it in...
And
What is that space called Lego?? It would be great if I could make it possible to build layers like building blocks
But I can't draw too much
Please understand generously~
Share post:
Comments
아티관리자
Hello? Arttystation.
Thank you for the first post^^
I have a question about the idea you told me, so I'll reply.
As in the sketch, if the paint is inserted looking slightly upward, the paint will probably pop out more than the outer frame (outer box).
(If you put it deep so that it doesn't protrude, it will be difficult to take it out)
Then, when you stack it up and down in a box, you'll probably get paint.
So, it seems that the angle should be set closer to the horizontal so that it does not take place. Is it still similar to the intended use?
Thank you for the first post^^
I have a question about the idea you told me, so I'll reply.
As in the sketch, if the paint is inserted looking slightly upward, the paint will probably pop out more than the outer frame (outer box).
(If you put it deep so that it doesn't protrude, it will be difficult to take it out)
Then, when you stack it up and down in a box, you'll probably get paint.
So, it seems that the angle should be set closer to the horizontal so that it does not take place. Is it still similar to the intended use?
김명석
No, the horizontal.......it's really just a matter of time, but if the lid is not properly closed and it's horizontal...
Then, the alternative is to increase the size of the plane.
Then, the alternative is to increase the size of the plane.
아티관리자
Yes, if the lid is not properly closed, it will flow down
If so, the alternative is to enlarge the frame size as you said
Abandon the top stacking and make it protrude from the frame but make it more textured
It will be ^^
If so, the alternative is to enlarge the frame size as you said
Abandon the top stacking and make it protrude from the frame but make it more textured
It will be ^^
김명석